The silicone ice cube mold is a unique ice cube mold that makes the process of preparing your favorite beverage easy. This gadget has a one-button seal which means that you do not have to worry about spilling water while pouring water into the cup. All you need to do is fill the mold with pour half of the water directly into the cup. It is made from durable food-grade silicone material that makes it easy to remove frozen ice cubes from its molds. It's the easiest way to make ice and take it out.



- Materials: food grade silicone,ABS
- Size: Diameter: 3.3" Height: 3.1"
- Usage
1: Pull out the plastic inner cylinder and pour water into the silicone container, slightly more than two grids, no more than two and a half grids.
2: Slowly insert the inner cylinder with the cover into the silicone mold, pay attention to rotating it to the bottom and hold it, and then gently pinch the side of the silicone under the cover eaves to exhaust to prevent the inner cylinder from floating.
3: When the freezing is complete, place the mold at room temperature for a few minutes, or press different positions of the mold with both hands to loosen the ice cubes, then pull out the inner cylinder. If you don’t want to wait and press hard, you can pour an appropriate amount of hot water into the inner cylinder for about 10 seconds, then drain the hot water and then pull out the inner cylinder.
4: Squeeze the outer wall of the silicone to continuously adjust the angle to remove the ice cubes.



